English
Reservation Check / Change
Cart
My Page
Search Procedure
English
Reservation Check / Change
Cart
My PageSearch Procedure

Doctor OhVely's Beauty Column

Is PicoSure Toning Effective for Melasma, Blemishes and Freckles? | Hongdae Toning

    278

PicoSure toning uses a 755nm alexandrite picosecond laser to target melanin in the skin. It is used for freckles, lentigines and some pigmented lesions, while melasma is sensitive to stimulation and prone to recurrence, so it needs a separate treatment strategy.

PicoSure is characterized by delivering laser energy in a very short time to create a photomechanical effect on pigment particles.

However, PicoSure does not remove all pigment at once, and it is not always more effective than conventional lasers.

Freckles: treatment of epidermal pigment with relatively clear borders

Lentigines and blemishes: selective treatment depending on the type and depth of the lesion

Melasma: low-irritation treatment, sun protection and recurrence management are important

Post-acne pigmentation: treatment according to the depth and course of the pigment after inflammation settles

Nevus of Ota and acquired bilateral nevus of Ota-like macules: consider a treatment plan for dermal pigment

Pores and acne scars: a separate treatment method using the PicoSure focus lens

The core of PicoSure treatment is adjusting energy to the type and depth of pigment, not firing the laser harder.


How Does PicoSure Toning Remove Pigment?

PicoSure delivers 755nm laser energy in picoseconds to cause a photomechanical reaction in melanin, inducing pigment to fade gradually.

A picosecond is one trillionth of a second.

PicoSure delivers laser energy in a very short time and uses the photomechanical effect of causing rapid pressure change in pigment particles.

Compared with conventional nanosecond lasers, the time over which energy is delivered is shorter, which under certain treatment conditions can help reduce heat spread to surrounding tissue.

But this does not mean there is no thermal action at all.

Also, a short pulse width does not by itself mean all pigment can be removed safely.

Treatment response and the risk of side effects can differ with the depth of the pigment, skin tone and laser energy settings.

The advantage of PicoSure is that melanin can be treated selectively using the 755nm wavelength and picosecond pulses.


What Are the Features of PicoSure's 755nm Wavelength?

The 755nm alexandrite wavelength is well absorbed by melanin, so it is used to treat pigmented lesions such as freckles, lentigines and nevi.

In laser pigment treatment, the length of the wavelength matters.

Different wavelengths are absorbed to different degrees by melanin, blood and water in the skin.

PicoSure's 755nm wavelength is used for pigment treatment targeting melanin.

It can be applied to pigment in the epidermis and to some dermal pigmented lesions.

However, 755nm is not the best wavelength for every skin tone and pigment type.

For darker skin tones or a high risk of pigmentation, other wavelengths such as the 1064nm family may also be considered.

In pigment treatment, a shorter or longer wavelength is not better in itself. What matters is choosing a wavelength suited to the target pigment and skin characteristics.


Is PicoSure Toning Effective for Melasma Too?

PicoSure can be used to lighten melanin in melasma, but melasma recurs easily and can worsen with excessive laser stimulation, so treatment must be cautious.

Melasma is more than pigment accumulated on the skin surface.

It is a chronic pigmentary disorder in which UV and visible light, hormonal changes, skin inflammatory reactions, and vascular and skin barrier changes are all involved.

Trying to remove melasma at once with a strong laser can instead cause inflammatory reaction and pigmentation.

PicoSure can treat melanin using a short pulse width, but for melasma, energy intensity and treatment interval must be set carefully.

In particular, if sun protection and lightening treatment are not combined, melasma can darken again even after treatment.

In melasma treatment, stably easing the pigment and managing recurrence matter more than fast removal.


Why Does Melasma Get Darker After PicoSure?

Melasma darkening after PicoSure treatment can occur for several reasons, including a temporary pigment reaction, post-inflammatory hyperpigmentation, and worsening or recurrence of the melasma itself.

If your skin looks darker after a laser, you may worry that the treatment went wrong.

But pigment changes right after treatment need to be distinguished by cause.

Some epidermal pigment can look temporarily darker after treatment or fade after fine scabs form.

On the other hand, if an excessive inflammatory reaction occurs in the skin, post-inflammatory hyperpigmentation can appear.

Melasma is sensitive to heat and inflammatory stimulation, so it can also become darker or reappear after treatment.

If pigment has darkened after treatment, simply raising laser intensity and repeating is not appropriate.

The timing and form of the darkening and whether inflammation accompanies it must be distinguished before deciding the next treatment direction.


Is PicoSure Effective for Removing Freckles and Blemishes?

PicoSure is a laser targeting melanin, and it can be used to improve some epidermal pigmented lesions such as freckles and solar lentigines.

Freckles and blemishes look similar but can be different pigment lesions.

Freckles are influenced mainly by genetic factors and UV exposure and are characterized by many small brown spots.

Solar lentigines are brown spots related to UV exposure and skin aging, with clearer borders than freckles and sometimes larger size.

PicoSure can treat the melanin of these pigment lesions as a target.

However, repeated UV exposure after treatment can bring new freckles or darken existing pigment again.

Also, not every brown spot is a simple blemish.

For a pigmented lesion that changes shape irregularly or grows quickly, distinguishing a skin disease should come first before laser treatment.


How Is PicoSure Used When Melasma and Blemishes Coexist?

When melasma and blemishes coexist, it is more important to treat melasma and individual pigmented lesions separately than to irradiate the whole face repeatedly with the same energy.

Pigment on the face may not be of only one kind.

There are also cases in which melasma spreads widely around the cheekbones and freckles or lentigines appear on top of it.

Treating all pigment with the same method then can give melasma unnecessary stimulation.

For melasma, it is important to ease it gradually while minimizing inflammation.

For freckles and lentigines with clear borders, selective treatment matched to each lesion can be considered.

Widely spread melasma → low-irritation pigment treatment and recurrence management

Freckles and lentigines with clear borders → selective treatment lesion by lesion

Melasma and blemishes together → distinguish treatment intensity by pigment type

What matters in PicoSure toning is not treating all pigment the same.


What Is the Difference Between PicoSure and Regular Laser Toning?

PicoSure is a 755nm laser using picosecond-range short pulses, while regular laser toning mainly irradiates a nanosecond-range 1064nm Q-switched laser repeatedly at low energy.

Regular laser toning approaches pigment by easing it gradually through repeated treatment rather than removing it at once.

PicoSure is characterized by using a shorter pulse width to exploit photomechanical action.

However, the two treatments differ in wavelength as well as pulse width, so it cannot be simply said that PicoSure is always better than regular toning.

In pigmentary disorders sensitive to stimulation such as melasma in particular, appropriate energy settings and treatment strategy may matter more than the type of laser.

Repeated low-irritation treatment centered on melasma → consider regular toning or pico toning

Individual pigmented lesions such as freckles and lentigines → consider selective picosecond laser treatment matched to the lesion

Pigment present in combination → distinguish wavelength and treatment method

PicoSure is not an unconditional replacement for conventional toning devices but a treatment option that can be used according to pigment type.


What Is the Difference Between PicoSure Toning and PicoSure fractional laser?

PicoSure toning focuses on improving melanin, while PicoSure fractional laser uses a focus lens and similar to create fine photomechanical stimuli in the skin, aiming to improve acne scars, fine lines and texture.

Even with the same device, PicoSure can have different treatment purposes depending on the handpiece and delivery method.


PicoSure toning

A method that treats melanin as the target.

It is used according to the characteristics of pigmented lesions such as freckles, lentigines and melasma.


PicoSure fractional laser

A method that creates fine photomechanical stimuli in the skin using a special lens such as a Focus Lens Array.

This induces skin regeneration and collagen reorganization and is used to improve acne scars, fine lines and texture.

Getting PicoSure toning does not automatically produce the same effect on pores or acne scars.

Concern is pigment → PicoSure toning

Concern is acne scars or texture → PicoSure fractional laser

Pigment and scars together → consider each method according to treatment purpose


Is PicoSure Also Effective for Pores and Acne Scars?

Fractional treatment with the PicoSure focus lens can be used to improve some acne scars, fine lines and texture, but it should be distinguished from ordinary pigment toning.

Acne scars arise when the collagen structure of the dermis is damaged.

Atrophic scars where the skin is depressed in particular do not improve just by removing pigment.

The PicoSure focus lens creates fine photomechanical stimuli in the skin to induce collagen reorganization.

This treatment can be used to improve some acne scars and texture.

However, deeply depressed scars may need separate treatment such as subcision or other fractional lasers, depending on the scar's form.

Also, treatment direction differs depending on whether pores are enlarged by excessive sebum secretion or by reduced skin elasticity.


How Many PicoSure Toning Sessions Are Needed to See an Effect?

The number of PicoSure toning sessions varies with the type and depth of pigment, and the repeated treatment of individual pigmented lesions such as freckles and lentigines cannot be described with the same number as for melasma.

One session of PicoSure does not make all pigment disappear.

Relatively shallow pigment located in the epidermis may change with a small number of sessions.

Pigment deep in the dermis or widely spread melasma may need several sessions.

For melasma, improving stably without worsening matters more than removing pigment quickly, so repeated treatment and maintenance care may be needed.

A protocol of several PicoSure toning sessions at 1 to 2 week intervals is also used, but this is not a standard cycle applied equally to every pigmentary disorder.

Freckles and lentigines → treat lesion by lesion and check the course

Melasma → repeated low-irritation treatment and recurrence management

Dermal pigmented nevus → stepwise treatment by depth and response

Tattoo → repeated treatment by color, depth and amount of ink

The number of treatments is not decided by laser performance alone.


Is PicoSure Toning Very Painful?

During PicoSure toning you may feel a sting like a rubber band snapping against the skin or a momentary burning sensation, and pain varies with energy and treatment method.

PicoSure is a laser that delivers energy with a very short pulse width.

But a short pulse width does not mean there is no pain at all.

Toning irradiated over the whole face at low energy and treatment of individual pigmented lesions at higher energy can differ in pain level.

Fractional treatment with the focus lens can also produce its own skin reaction and pain.

Describing PicoSure uniformly as a painless laser is not accurate.


Do Scabs Form After PicoSure Toning?

In low-energy toning there may be almost no visible scabs, but when individual pigmented lesions are treated, temporary darkening of pigment or fine scabs may appear.

Skin reaction after PicoSure differs by treatment method.

Toning that irradiates the whole face at low energy has a relatively light recovery burden.

When pigmented lesions with clear borders such as freckles and lentigines are treated selectively, the treated spots may darken temporarily or form fine scabs.

If scabs form, do not pick them off.

Also, UV exposure or excessive friction after treatment can raise the risk of post-inflammatory hyperpigmentation.


When Can I Wash My Face and Wear Makeup After PicoSure?

Low-intensity toning with almost no damage to the skin surface allows a relatively quick return to daily life, but if scabs or blisters form, avoid irritation until the area has recovered.

PicoSure toning differs from a peel that exfoliates a wide area of the skin surface.

With low-energy treatment, recovery time can be relatively short.

However, redness, warmth and skin sensitivity may increase temporarily right after treatment.

When washing your face, avoid hot water and hard friction, and keep up moisturizing and sun protection.

If pigmented lesions were treated strongly or scabs formed, how you wear makeup and wash may need to be adjusted.


Can Pigmentation Occur After PicoSure Toning?

PicoSure can help reduce thermal damage to surrounding tissue, but side effects such as post-inflammatory hyperpigmentation, hypopigmentation and worsening of melasma are still possible.

PicoSure is a laser that targets pigment, but in skin with a lot of melanin it can also affect the pigment of normal skin.

Pigment changes can appear after treatment especially when the skin is sensitive to stimulation or has had a lot of recent UV exposure.

Melasma can worsen with repeated heat and inflammatory stimulation, so extra care is needed.

Possible side effects include temporary redness and swelling, scabs, post-inflammatory hyperpigmentation and hypopigmentation.

Rarely, blisters or scarring may occur.

A picosecond laser is not free of side effects, and choosing a treatment intensity that matches the type of pigment and the skin's response is important.


How Can I Reduce Recurrence of Melasma and Blemishes After PicoSure Toning?

After PicoSure treatment, sun protection and managing skin irritation are important, and melasma recurs easily, so continued maintenance care is needed.

Pigment lightened by a laser can still be produced again.

UV in particular promotes melanin production, so neglecting sun protection after treatment can make pigment darken again.

Visible light can also affect melasma, so a tinted sunscreen containing iron oxides may help.

Also, forcing strong exfoliants or high-concentration active cosmetics on a skin barrier that has been irritated can worsen inflammation.

After treatment, it is best to reduce use of irritating products and keep the skin well moisturized until it has settled.

For melasma, managing the conditions in which pigment darkens again matters more for long-term results than removing pigment once.


What Matters Most in PicoSure Toning?

What matters in PicoSure toning is distinguishing the type of pigment, such as melasma, freckles, lentigines and dermal pigment, and treating with appropriate energy, rather than removing pigment forcefully.

Brown spots on the skin are not all the same pigment.

For melasma, long-term management that considers the possibility of recurrence and worsening is important, while for freckles and lentigines selective treatment matched to the lesion's characteristics can be considered.

Also, a nevus located in the dermis may need a different treatment plan from epidermal pigment.

PicoSure is a 755nm alexandrite picosecond laser used for treatment targeting melanin.

With the focus lens added, treatment for other purposes such as improving acne scars, fine lines and texture can also be arranged.

But pigment treatment and fractional skin regeneration treatment should be distinguished.

Melasma → pigment treatment with reduced irritation and recurrence management

Freckles and lentigines → selective treatment by pigmented lesion

Dermal pigmented nevus → stepwise treatment by pigment depth

Brown acne marks → treatment for post-inflammatory hyperpigmentation

Red acne marks → consider treatment for vascular changes

Acne scars and texture → PicoSure fractional laser with the focus lens

Accurately distinguishing which pigment is being treated and choosing the wavelength and energy suited to that pigment is the starting point of satisfying pigment treatment.


PicoSure Toning FAQ


Is PicoSure effective for melasma?

PicoSure can be used to lighten the pigment in melasma, but melasma can recur and worsen, so low-irritation treatment and sun protection should be considered together.


How many PicoSure toning sessions do I need?

The number of sessions varies with the type and depth of pigment. Freckles and lentigines are not treated with the same number of sessions as melasma or dermal pigmented nevi.


Are PicoSure and PicoSure fractional laser the same treatment?

They can use the same kind of picosecond laser device, but the treatment purpose and delivery method differ. Toning focuses on improving pigment, while PicoSure fractional laser focuses on improving acne scars, fine lines and texture.


Is PicoSure toning better than regular laser toning?

PicoSure is characterized by its short pulse width and 755nm wavelength, but it is not superior to regular toning in every pigmentary disorder. A wavelength and treatment intensity suited to the pigment type and skin tone matter.


Can PicoSure completely remove freckles?

Freckles can be lightened or removed with laser treatment, but they can reappear because of UV exposure and genetic factors. Sun protection is still needed after treatment.


Is PicoSure also effective for acne marks?

It can be used for brown post-inflammatory hyperpigmentation, but red acne marks may be mainly vascular changes and may need different treatment.


Is PicoSure also effective for shrinking pores?

Fractional treatment with the focus lens can be used to improve texture and the appearance of some pores. It should not be described as having the same effect as ordinary pigment toning.


Will my face get whiter with PicoSure?

PicoSure targets melanin, so as blemishes fade, skin tone may look more even. It is not a treatment that always makes the skin lighter than its natural color.


Can pigment get darker after PicoSure?

Pigment may look temporarily darker right after treatment, and post-inflammatory hyperpigmentation or worsening melasma can also occur. The cause of the pigment change needs to be distinguished.


Can I wear makeup right after PicoSure?

After low-intensity toning with no damage to the skin surface, daily life resumes relatively quickly. However, if there are scabs, blisters or clear redness, avoid irritation until recovered.


Is PicoSure also used to remove tattoos?

PicoSure is also used for tattoo pigment removal. However, the appropriate wavelength and number of sessions differ with the tattoo's color, ink depth and skin tone.


Can PicoSure toning and Excel V laser be done together?

PicoSure targets melanin, while Excel V, depending on settings and wavelength, can be used to treat vascular redness and some pigment lesions. When there are combined skin concerns, combining can be considered by separating the treatment purposes.